2024 Subaru Outback Brake Pad Replacement Guide

2024 Subaru Outback with mud on front and sides parked near mountains

 

As you apply the brakes in your new Subaru Outback, the brake pads and rotors work together to bring your vehicle to a stop on Herriman streets. To maintain seamless, hassle-free braking, Subaru brake pads are crafted to last for several years. However, there will eventually come a time when they must be replaced. Our service team at Mark Miller Subaru South Towne is ready to provide lasting brake service. However, if you prefer to take your service into your own hands, this 2024 Subaru Outback brake pad replacement guide is for you.

When to Replace Brake Pads on a 2024 Subaru Outback

Your brake system is designed to last for many miles around Midvale before you need to replace them. However, to ensure your brakes are working properly, it’s recommended that you or a service technician inspect the brakes every 12,000 to 15,000 miles, or 12 to 15 months, depending on your driving style. Generally, replacing the brake pads on your 2024 Subaru Outback should happen every 30,000 to 70,000 miles as the lining wears down and becomes thinner.

How to Remove Subaru Brake Pads

Replacing the brake pads on a 2024 Subaru Outback may seem like a daunting task, but it can be done at your home near South Jordan with the proper time and care. You’ll need gloves, a tire iron, a ratchet and socket set, a brake tool, a car jack, and jack stands. Note: It’s recommended that you disconnect the battery before performing any brake pad service. If you’re unfamiliar with the process, schedule a service at your Subaru dealer for brake pad replacement. 

Follow these steps when replacing the brake pads on a 2024 Subaru Outback:

  1. First, loosen the lug nuts on the wheel while the vehicle is on the ground. Then, raise the vehicle high enough to comfortably reach the brake pads and rest the vehicle on jack stands.
  2. Take off the appropriate wheels and tires using a tire iron, and you’ll see the brake rotor and caliper assembly. If the caliper isn’t easy to access, try turning the wheel left or right for better access. Locate the bolts on the interior side of the caliper assembly and use a ratchet and socket to remove them. Ensure the brake line stays connected, and rest the caliper on top of the rotor while you work.
  3. Pay close attention to the position of the brake pads and remove them from both sides of the rotor. If the clips holding the brake pads in place are damaged, you can use the clips that come with our new brake pads in their place.
  4. Before installing the new brake pads, you’ll need to prepare them with brake grease and a brake cleaner, if specified by the manufacturer. Apply brake grease to the metal plates on the back of the new brake pads. Typically, a dime-sized amount is enough. Place the new brake pads in the same position as the old ones. Your vehicle’s owner’s manual should outline the correct placement.
  5. To adjust the caliper assembly to fit your new brakes, you’ll need a brake tool. Take your old brake pads and place them inside the caliper assembly, position it against the circular piston, and tighten them against the old brake pads. Continue until you have a secure, firm fit. This allows the caliper assembly to fit over your new brake pads. Place the caliper assembly back in its original position and tighten the bolts by hand. Use a socket wrench to tighten the rest of the way.
  6. You’re now ready to reinstall the tire. Put the tire back on, tighten the lug nuts by hand, and use the car jack to lower the vehicle to the ground. Once the vehicle is level, use the tire iron to finish tightening the lug nuts. Repeat the step above as needed for the other brakes on your vehicle.

Service Your Subaru with Mark Miller Subaru South Towne!

Learning how to replace the brake pads on a 2024 Subaru Outback is one maintenance task you can tackle yourself. To make sure you’re staying safe on roads, it’s also a good idea to learn how to check your brake fluid. Whether you’re changing your brake pads or completing an oil change, the team at Mark Miller Subaru South Towne in Sandy is here to help. Take advantage of our service specials on your next visit.

More from Mark Miller Subaru South Towne

  • 2024 Subaru Outback Exterior

      The 2024 Subaru Outback combines the practicality of a station wagon with the ground clearance and all-weather capabilities of a rugged SUV. It’s ideal for any active, adventurous family in Herriman and the surrounding areas thanks to a spacious cabin with ample cargo room and plenty of amenities. But what about this vehicle’s exterior?…

  • 2024 Subaru Forester MPG

      The 2024 Subaru Forestermpg continues to impress, making it a top choice for Herriman drivers who need fuel efficiency and performance. This compact SUV combines reliability and all-wheel drive capability with excellent Subaru Forester gas mileage—perfect for both Midvale commuting and outdoor adventures.  Read on for everything you need to know about the Subaru…

  • 2024 Subaru Outback Performance

      Begin an exciting Herriman driving adventure with the 2024 Subaru Outback. This brand-new Subaru is ideal for families who regularly trek across the Midvale area. Explore our inventory for an up-close look at the dynamic 2024 Subaru Outback specs. Whether you’re intrigued by the power, efficiency, or reliability of the Subaru Outback engine, we’ve…

Menu

Get Directions

10920 S State St, Sandy, UT, 84070
Mark Miller Subaru South Towne 40.553550160121475, -111.89211314621261.